Schedule your complementary project consultation now.

SEG Fabric Printing | Silicone Edge Graphics and Frames

What SEG Fabric Printing Is

SEG fabric printing puts your artwork on fabric by dye sublimation, then finishes the panel with a silicone strip sewn around the edge. The strip seats into a grooved aluminum frame and pulls the graphic tight, with no visible border.

Dye sublimation is water-based: the ink becomes part of the fabric rather than a coating sitting on top of it. The panel folds down for shipping and packs smaller and lighter than a rigid printed board.

Because the fabric is held only by its silicone edge, the graphic can be changed out without reinstalling the frame, so one structure carries several campaigns. Our silicone edge graphics guide covers the process at length.

Large wall graphics above the product tables in an electronics store
Three large black-and-white wildlife prints on gallery walls above a lounge seat
Patterned fabric panel suspended over desks in an open-plan office

What You Get When You Order

Every project runs through QualMAX™, an 11-step accuracy assurance process. Signature Service™ backs the order with a dedicated Print Specialist, so there is one person to send dimensions, files and venue details to.

Fill out the form and you will hear from us within 24 hours about anything else we need. We connect you with the Color Reflections location that fits the project, put a quote together, and build the graphics once you accept it. Packing, shipping and installation are part of the large format printing service, and installation runs through a nationwide network of trained technicians.

EXPress Service™ is built for short deadlines and enables next-day turnaround, with rush charges. Ask your Print Specialist whether your job qualifies before you commit to a show date.

Backlit and Non-Lit SEG Frames

A non-lit SEG frame is fabric in a frame: a trade show backwall, a lobby panel, a retail header. A backlit frame puts a lightbox behind the fabric so the image carries across a crowded hall or a store full of competing signage. The print is produced the same way for both. What changes is the frame and the light behind it.

Our Hollywood, Florida team printed and installed a backlit SEG retail graphic for the Girard-Perregaux luxury watch collection.

Frames can be free-standing, wall-mounted or suspended. If you are specifying a lit panel, our SEG light boxes guide covers that format on its own.

Sizes and Formats

There is no single standard SEG size, and we publish none. Frames are built to the space. We produce prints from 10 feet to any length, so on a backwall the limit is usually the venue rather than the press.

Formats run from free-standing and curved backwalls to towers, counters, hanging signs and backlit lightboxes — the range covered in our tension fabric displays guide. SEG signage also works away from the show floor: airports, stadiums, holiday retail displays and corporate offices.

Before you ask for a quote, measure the width and height you have been allotted and note any height limit the venue sets on hanging structures. Send those numbers with your request. For the rest of a booth build, see our trade show graphics page.

Fabric and Print Method

Every SEG graphic we produce is dye sublimated onto fabric with water-based ink, then finished with the sewn silicone edge.

Tell us whether the frame will be lit from behind when you request the quote. It affects how the panel should be produced, and it is easier to settle before the file is locked than after.

Artwork Setup for the Silicone Edge

Build the file to the exact finished size of the graphic, not the outside dimension of the frame.

Keep logos and critical text away from the outer edge. That is the band where the silicone strip tucks into the channel and the fabric curves out of sight, and anything sitting in it gets lost.

Use high-resolution images so dye sublimation reproduces them cleanly at the size you are printing — a file that looks acceptable on a monitor can fall apart at ten feet. Then ask for a proof and confirm your brand colors before the job goes to press.

Where We Print, and Where We Ship

Color Reflections prints SEG graphics at three locations: Atlanta, Georgia; Hollywood, Florida; and Philadelphia, Pennsylvania. When your request comes in, we route it to whichever of the three fits the project.

We ship to all 50 states and the Caribbean territories, including Puerto Rico and the U.S. Virgin Islands. Installation runs through a nationwide network of trained technicians, so a backwall printed in Philadelphia can be installed at a show in another state. Our shipping and installation page sets out how that works.

Frequently Asked Questions

What is SEG fabric?

SEG fabric is a printed fabric panel with a thin silicone strip sewn around its edge. The strip seats into a groove in the frame and holds the panel tight, which is what removes the visible border. The printing is dye sublimation, water-based.

What is an SEG display?

An SEG display is the frame and the fabric together: an aluminum frame with a grooved channel, wrapped in a silicone edge graphic. It can be free-standing, wall-mounted or suspended, lit from behind or not lit. Trade show backwalls, retail headers and lobby panels are all SEG displays.

How do you change an SEG graphic?

You release the silicone edge from the channel, lift the old fabric out, and press the new panel in along each side. The frame stays where it is, so a structure bought for one show carries the next campaign. Order the replacement fabric to the same finished size.

How much does SEG fabric printing cost?

It depends on the size of the panel, whether the frame is backlit, how many you need and where it ships. Send the form with your dimensions and we will come back within 24 hours with anything else we need, then quote the project.

Can you ship SEG graphics to my trade show or store?

Yes. We ship to all 50 states and the Caribbean territories, including Puerto Rico and the U.S. Virgin Islands, from Atlanta, Hollywood and Philadelphia. Installation can be arranged through the nationwide technician network. Tell us the venue and the date when you request a quote.

Fill out the form to get started. What happens next?

  1. We’ll connect you with the best Color Reflections location for your business & project.

  2. You’ll hear from us within 24 hours about any additional information we might need.

  3. We’ll put together a quote for your unique project. We’ll assemble a plan to create your custom SEG graphics and bring your ideas to life.

  4. If our quote is accepted, we’ll begin crafting your one of a kind designs with the highest quality materials available.

Schedule Your Project Consultation
Reserve your FREE project consultation. Get personalized guidance & answers to your printing questions.

Join Our Mailing List

Receive occasional design tips, news, and new product alerts.