Schedule your complementary project consultation now.

ADA Signage Requirements: Sizes, Braille, and Mounting

A person reading a braille sign by touch. The sign is an example of custom ADA signs designed for accessibility, featuring raised braille text for visually impaired users.

ADA signage is one of the few print jobs where the dimensions are not a design choice. Character height, braille, mounting height and the position of the sign next to the door are written into a federal standard. A sign that misses them gets remade, usually after the walls are painted and the building is open.

This guide covers what the 2010 ADA Standards for Accessible Design ask of a sign: which signs need raised characters and braille, which need visual type only, how large the letters have to be, and where on the wall each one goes. Color Reflections produces this work as custom ADA and tactile signage, and the sign schedule described at the end is what a printer needs from you before anything is made.

One thing to settle early: state and local building codes can add to the federal baseline, and your architect or code official is the one who approves the final schedule. The figures below are the federal minimums the rest is built on.

Key takeaways

  • Only some signs have to be tactile. Permanent room and space names do. Directional and informational signs need visual characters only.
  • Raised characters run 5/8 inch to 2 inches tall, uppercase, sans serif, and stand 1/32 inch off the surface.
  • Grade 2 braille goes below the text, at least 3/8 inch clear of the raised characters and of any border or decoration.
  • Tactile copy mounts between 48 and 60 inches above the floor, on the latch side of the door, with an 18 by 18 inch clear space in front of it.
  • Visual character height scales with viewing distance: 5/8 inch at 6 feet, plus 1/8 inch for every additional foot.
  • Finish must be non-glare, and characters must be light on dark or dark on light. No minimum contrast ratio is specified, so the color pairing is a judgment call.

Which signs have to be tactile, and which do not

The first question is not how to build the sign. It is whether this particular sign is covered at all. The standard splits signs into three groups.

Tactile and visual. Signs that identify permanent rooms and spaces need raised characters and braille as well as readable visual type. A restroom, a stairwell, a numbered office, a mechanical room: these carry a name or number that does not change, so a person has to be able to find it by touch. Labels on exit stairway, exit passageway and exit discharge doors are tactile for the same reason. So are elevator hoistway floor designations and car controls.

Visual only. Directional and informational signs are exempt from the tactile rules. The overhead sign that points to Radiology, the sign listing building hours, the arrow at the end of a corridor: these need to meet the visual character rules and nothing more. This is the line that catches people out, because a wayfinding package and an ADA package overlap on the same walls. Our guide to wayfinding and directional signs covers how the two fit together across a floor plan.

Exempt from both. A short list of signs sits outside the visual and tactile requirements entirely: temporary signs posted for seven days or less, building addresses, building directories, occupant and company names and logos, menus, and seat or row designations in assembly areas.

Directories being exempt surprises most buyers. Plenty of owners still specify braille on a lobby directory because it makes the building easier to use, which is a defensible choice. It is a choice, though, not a requirement. Color Reflections lists office directories, room numbers, tactile exit signs, accessible restroom signs, pictograms and name plates among the ADA items it produces, so a directory can be built either way.

Raised characters: height, case, and depth

Raised characters have tighter limits than any other printed type you will specify.

  • Height: 5/8 inch minimum, 2 inches maximum, measured on the uppercase letter I. The minimum drops to 1/2 inch when the visual version of the message sits on a separate sign.
  • Depth: raised at least 1/32 inch off the background.
  • Case: uppercase only. There is no option here.
  • Style: sans serif. Italic, oblique, script and heavily decorated faces are out.
  • Stroke: the stroke of the uppercase I can be no more than 15 percent of its height.
  • Proportion: the width of the uppercase O must be between 55 and 110 percent of the height of the uppercase I.
  • Line spacing: 135 to 170 percent of the character height.

Those last three rules quietly rule out a lot of brand typefaces. A condensed corporate sans will often fail the O-to-I proportion test, and a heavy weight will fail the stroke limit. The usual answer is a compliant tactile face for the raised line and the brand face for the visual line on the same sign, which the standard permits as long as each line meets its own rules.

Grade 2 braille and where it sits

Braille has to be Grade 2, the contracted form. Unified English Braille qualifies. Dots are domed or rounded, never flat-topped, and the dimensions are specific: dot height 0.025 to 0.037 inch, dot diameter 0.059 to 0.063 inch, spacing within a cell 0.090 to 0.100 inch, between cells 0.241 to 0.300 inch, and between lines of cells 0.395 to 0.400 inch.

Placement matters as much as the dots. Braille goes below the text. On a multi-line sign it goes below the whole block of text, not line by line. It must sit at least 3/8 inch away from the raised characters and from any border, rule or decorative element, so a tight frame or a thin keyline can put an otherwise correct sign out of compliance. Capitalization in the braille is limited to the first word of a sentence, proper nouns, individual letters, initials and acronyms.

Translation is where errors enter. Send the printer the exact text, in the exact case and punctuation you want, and have the braille translated from that approved string rather than from a drawing label. A sign that reads CONFERENCE ROOM A in raised type and something else in braille looks finished and is not.

Mounting height and position at the door

Height is measured to the baseline of the characters, not to the edge of the plate.

  • 48 inches minimum above the finish floor, measured to the baseline of the lowest tactile character.
  • 60 inches maximum above the finish floor, measured to the baseline of the highest tactile character.

A tall sign with several lines of raised copy can therefore fail at both ends at once, which is why the number of tactile lines is a design constraint and not just a layout preference.

Position follows the door hardware:

  • Single door: on the latch side. The push side is allowed only for doors with closers that have no hold-open device.
  • No wall on the latch side: the nearest adjacent wall.
  • Double doors with one active leaf: on the inactive leaf.
  • Double doors with two active leaves: to the right of the doors.

In front of every tactile sign there has to be an 18 by 18 inch clear floor space, centered on the tactile characters, free of protruding objects up to 80 inches high, and positioned beyond the arc of the door swinging from closed to 45 degrees. That last clause is the one that moves signs during a walkthrough. A sign placed by eye in a narrow vestibule is often inside the swing.

Visual characters and viewing distance

Visual characters are the ones everyone reads from a distance, and their rules are looser in style and stricter in size. Upper and lower case are both allowed, in conventional forms. Stroke thickness runs 10 to 30 percent of character height. Character spacing runs 10 to 35 percent of character height. Line spacing is 135 to 170 percent, same as tactile. Characters sit at least 40 inches above the floor.

Minimum height then depends on two things: how high the sign is mounted, and the horizontal viewing distance, meaning the distance to whatever fixed obstruction stops a person getting closer. For characters mounted 40 to 70 inches up, the floor is 5/8 inch at under 6 feet, then 1/8 inch is added for every foot of viewing distance past 6 feet. Mounted higher, the baselines rise: 2 inches above 70 inches up to 10 feet, and 3 inches above 10 feet, each with the same 1/8 inch per foot escalator beyond 15 and 21 feet respectively.

Visual character sizing

How tall the letters have to be, by viewing distance

Minimum character height for visual, non-tactile signs mounted 40 to 70 inches above the floor, as the reading distance grows.

Read from 6 feet

5/8 in

Read from 10 feet

1 1/8 in

Read from 15 feet

1 3/4 in

Read from 20 feet

2 3/8 in

Source: 2010 ADA Standards for Accessible Design, section 703.5, minimum visual character height by horizontal viewing distance.

Read that as a budgeting tool, not just a compliance table. An overhead corridor sign read from 20 feet needs characters nearly four times the height of a door plaque read at arm’s length, which changes the panel size, the substrate and the number of signs that fit a corridor.

Pictograms and the 6-inch field

When a pictogram labels a permanent room or space, the field it sits in has to be at least 6 inches high. The 6 inches apply to the field, not to the symbol inside it, so a small icon floating in a tall band is still correct. Raised text and braille go directly below the field, outside it. The pictogram itself does not have to be raised, but the field has to meet the finish and contrast rules.

Informational pictograms, including the International Symbol of Accessibility used on its own, do not need the 6-inch field or tactile text. They still have to meet finish and contrast.

Finish, contrast, and material

Where one set of characters serves as both the tactile and the visual message, the characters and their background need a non-glare finish and must contrast light on dark or dark on light. The standard sets no minimum contrast ratio, which means a gloss clear coat or a mid-tone-on-mid-tone palette can be the thing that fails an otherwise correct sign. Braille is exempt from the finish and contrast rules, and if the visual characters live on a separate sign, the tactile sign is exempt too.

Material choice follows the location. For permanent work, including ADA signs, exit and entrance signs and other navigational signs, Color Reflections recommends acrylic, wood or metal. For temporary needs, such as a weekend conference or a retail sale, the same message can run on fabric or vinyl banners, rigid board such as foam or gator board, coroplast, or wall and window decals. Non-standard shapes, dimensional signs, mounting and hanging hardware fall under custom fabrication, which is where a sign that does not come off a standard plate gets built.

Where ADA signs fit in the rest of a building’s graphics

ADA signage is rarely bought on its own. It arrives with the wayfinding and directional signage for the same floor, and often with wall graphics and interior branding. Running those packages through one printer is what keeps the type, color and finish consistent from the lobby sign to the room number, instead of a building that reads as three separate projects.

The buildings that need it most are the ones where a stranger arrives under stress. Hospital and healthcare signage has to work for a visitor who has never been in the building and is not reading carefully. University and educational signage covers sprawling campuses where room numbers and building names carry the whole navigation load. Hotel and hospitality signage puts room plaques, elevator signage and amenity direction in the same package. In each case the tactile signs and the experiential and environmental graphics around them are specified together.

What a printer needs from you

A sign package quotes and produces cleanly when it arrives as a schedule rather than a request. Send:

  • A sign schedule keyed to the floor plan, one row per sign, with quantities.
  • The exact message for each sign, in the case and punctuation you want, since the braille is translated from that string.
  • Which signs are tactile and which are visual only, or the room types so that call can be made with you.
  • Pictograms required, and the symbol artwork if it is a specific one.
  • Mounting position per door: latch side, adjacent wall, inactive leaf, or to the right of a pair.
  • Mounting height, and any ceiling or obstruction that sets the viewing distance for overhead signs.
  • Substrate, finish and the two colors you want paired, or a request for a recommendation.
  • Brand fonts, so the compliant tactile face and the brand visual face can be set side by side.

Large artwork and plan sets go through file upload. If the schedule does not exist yet, a project consultation is the faster start: the usual next step is a review of what you want to create, a reply within 24 hours about any additional information needed, then a plan and a quote. Production and installation run out of Philadelphia, Atlanta and Hollywood, Florida.

Common questions

Do directional signs need braille?

No. Directional and informational signs need visual characters only. Raised characters and braille are required on signs that identify permanent rooms and spaces, and on exit stairway, passageway and discharge door labels. Adding braille to a directory or a directional sign is allowed and sometimes worth doing, but it is not required.

How high should an ADA sign be mounted?

Between 48 and 60 inches above the finish floor. The 48 inch minimum is measured to the baseline of the lowest tactile character and the 60 inch maximum to the baseline of the highest, so the number of tactile lines affects where the plate can sit.

Can ADA signs be printed, or do they have to be engraved?

The standard does not name a production method. It sets the raised height of at least 1/32 inch, the braille dot dimensions, the character proportions and the non-glare finish. Any process that meets those is acceptable. For permanent locations Color Reflections recommends acrylic, wood or metal.

What contrast do ADA signs need?

Characters must contrast with their background, light on dark or dark on light, and both must have a non-glare finish. No minimum ratio is given in the standard. Braille is exempt from the finish and contrast rules.

Does one sign have to carry both the tactile and the visual message?

Not necessarily. The visual characters may sit on a separate sign. When they do, the tactile sign is exempt from the finish and contrast rules and its raised characters may be as small as 1/2 inch instead of 5/8 inch.

Ready to price a package, or want a sign schedule checked before it goes to production? Start with custom ADA and tactile signage.

Join Our Mailing List

Receive occasional design tips, news, and new product alerts.